PhoneSweep Technical Specifications by Model
| PhoneSweep Model |
Modem
Capacity |
Phone Numbers
per Profile |
Approx Calls
per Hour |
| Plus 16 |
16 |
* 20,000 |
1000 |
| Plus 12 |
12 |
* 20,000 |
750 |
| Plus 8 |
8 |
* 10,000 |
500 |
| Plus |
4 |
* 10,000 |
250 |
| Basic |
1 |
800 |
60 |
* More numbers can exist in a profile, but performance may suffer on all but high-end machines.
Download the PhoneSweep Demo
System Requirements for PhoneSweep Dialing Computer
Minimum requirements:
PhoneSweep typically does not require a high-performance computer.
However, if the requirements listed below won't allow reasonable
performance of the version of Windows you plan to use, be governed by
the operating system's requirements instead.
PhoneSweep Basic - 1 modem
- CPU: 200 MHz PC or Laptop
- RAM: 32MB
- DISK SPACE: 50MB
For PhoneSweep Plus 4 or 8
- CPU: 333 MHz PC or Laptop
- Celeron/PII or Pentium III
- RAM: 64 MB
- DISK SPACE: 100 MB
- To use profiles over 10,000 numbers
- Above our supported level of operation
- Sandstorm recommends using a 400 MHz or faster processor
For PhoneSweep Plus 12 or 16
- CPU: 600-700 MHz PC or Laptop
- Pentium III or equivalent
- RAM: 128 MB
- If you have profiles over 20,000 numbers
- Above our supported level of operation
- Sandstorm recommends using 256 MB RAM
To use Single Call Detect or bruteforce PPP systems, a 400 MHz or faster processor is recommended.
See descriptions of the bundled PhoneSweep models we offer.
Operating System
PhoneSweep runs under Windows 98 / NT4 / 2000 Pro SP2 / 2000 Server SP1 / XP / 2003 Server / Vista.
We do not recommend or support using PhoneSweep on Windows ME.
If you have a choice of platforms, we recommend that you install PhoneSweep on a computer using
Windows 2000 or XP, as these offer reasonable performance, stability and hardware-compatibility.
- Microsoft Excel 2000
or later – to use Chart feature
- Microsoft Word
to view PhoneSweep reports (RTF format)
Modem Phone Line(s)
Modem Phone Line(s) should be dedicated analog or ISDN phone lines, free of incoming calls. Incoming calls will
cause line errors and interfere with PhoneSweep’s operation (PhoneSweep will stop dialing on that line). If dialing
outside your local phone system, we recommend using direct lines if possible. Please verify that each line is free
of blocks on both your side and telephone company’s side.
Please see the recommended modems for further modem details and
multiport solutions for help with multi-port serial I/O card selection.
Security
We recommend for added security, that the PhoneSweep system not be connected to any network; or that you
disconnect the system from the network when you are not present. If system is on a network, such as when using
Gold Distributed and/or
Automatic E-mail Notification options, all security precautions should
be followed (See the PhoneSweep Gold Manual for additional information).
| 
Sandstorm Home
Products
